TLT250AT clearfloor lift
This machine is applicable for the lifting of various small and medium-sized vehicles with total weight below 5.0t in garage and workshop
Feature
1.The cable and oil pipe are fully concealed, with decent and elegant appearance.
2.Designed based on the international standard, meeting the demand of the garage and workshop.
3.Top limit switch, effectively protecting the vehicle from overhead collision.
4.Dual hydraulic cylinders drive, stable lifting and lowering.
5.Automatic full-scope safety lock, safe and simple in operation.
6.Adopt two steel cables for equalization, force two carriages to move synchronously, and effectively prevent the vehicle from tilting.
7.Lowest height of lifting pad is 110mm, good for repairing low chassis or low profile car.
Specification
*Rated capacity (kg) 5000
*Lifting height (mm) 1900
*Lifting time 50
*Lowering time 40
*Motor power (kw) 3
*Passagge width(mm) 2500
*Overall width(mm) 3560
*Overall height(mm) 4150
Function Improvement Cable guide block design change Cable guide block is added a roller to prevent the lock release cable from rubbing with guide block. 2011-5-3 TLT250AT arm lifting pad code changes Arm lifting pad code changes ,old code:201020784;new code:201021534 2010-7-16 Cyliner part# changes OLe part#:102200329/TLT245AT cylinder(Black),assemblyTLT245AT-50-01-00-B New part#:102200321/TLT245AT cylinder(Gray)assembly,TLT245AT-50-01-00-B 2010-7-8 Kit code for TLT250AT height increase Since the product height is increased, the relative modified components can be packaged as a kit for aftersales service and retrofit in the fields.The kit code is 201023636. 2010-4-20 TLT250AT two post lift height increasing In order to meet the marketing need, TLT250AT height will be increased from 3780mm to 4150mm. The information of the involved parts to be modified are as follows 1Old -- Extension column, code: 201021091 New -- Extension column, code: 201023637 2. Old --Steel cable assembly,L=10390;code:103201646 New --Steel cable assembly ,L=11130;code:103202324 3. Old--Steel rope,φ1.6mm,L=8300;code:101060019 New--Steel rope,φ1.6mm,L= 9040;code: 101060026 4. Old -Hydraulic hose linking to cross beam; code:104120096 New-- Hydraulic hose linking to cross beam; code: 104120148 2010-4-16
Spare Parts No. PartCode PartName 1 201021158 TLT250AT powerside column 2 201021089 TLT250AT offside column 3 201023637 TLT250AT Extension column 4 201011236 Bottom cover for column 5 104090045 Upper sheave 6 103050035 Returning ring 25 7 201012493 Connecting bracket 8 201012494 Connecting bracket 9 201012138 Reinforced connecting plate 10 201020508 Power unit bracket 11 103060342 Pin, 3x26 12 103202324 Steel cable assembly,L=11130 13 103201949 Guide block for steel rope 14 201021104 Inner top beam 15 201021105 Outer top beam 16 201011257 Spacer 17 201011477 Long rod axle 18 201011805 Long rod 19 104130196 Protection cover,L=1800mm 20 103200966 Asymmetric axle 21 201011258 Spacer I 22 103200967 Symmetric axle 23 206010267 Limit switch box assembly 24 201011806 Inner cover of column 25 103990096 Pump unit(China-made),380V/50HZ/Manual override/12L 26 104120101 Hydraulic hose 27 104120148 Hose connecting to cross beam,L=6110 28 103100172 T fitting,M18*1.5 29 104120069 Hose,L=930 30 103201847 Control flow fitting assembly 31 103040188 Seal gasket