KWB-503 Wheel Balancer
different ALU modes, simple structure with good design and weight-hiden function
* Different Alu modes
* Weight saving
* Optimization
* Hidden weight
Feature
3D Sensor Arms
LED Display
40" Wheel Diameter
Cars and Motorcycles
Specification
*Diameter of shaft: 1.57″(40mm)
*Balancing aaccuracy: 0.05oz(1g)
*Wheel data acquisition: manual and automatic
*Rim Width: 1.5″~20″(38--508mm)
*Wheel width with guard : 21″(530mm)
*Measurable rim diameter: 8″~26″(203-660mm)
*maximum wheel diameter with guard: 40″(1000mm)
*Maximum wheel weight: 154Ibs.(70kg)
*Power supply:230V/110V,1Ph, 50Hz/60Hz
*Cycle time:7 seconds(average 13″~16″ wheel)
Function Improvement KWB-503 display board PCB engineering change KWB-503 display board PCB engineering change company code version:102200475 PCB version: V1.04.000 2012-3-26 KWB-503 power board engineering modification PCB version: V1.03.000 campany code version: 102200474 102200474 KWB-503 power board PCB,168×147×1.6mm,FR-4,double layer,tin-sprayinggreen oil,2 ounce copper
CC route KWB-503\hardware\ POWER \KWB503POWER.PCB
ModificationU4,LM2596buttom layer, remove the copper to avoid short circuit. 2012-3-23 KWB-503 wheel balancer display board and mianboard improvement KWB-503 display board To save the cost and improve the reliability, then solve the instability of the display, so simplify the elements and change the structures.
KWB-503 main board Mainly change one connector and add the interface of the laser pen. ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Remarks The main boards of KWB-501/502,KWB-503,KWB-503+ and KWB-530 will all be changed to this one since their main boards were the same. 2012-1-7 KWB-503 customer upgrading programme releasing This is the 2nd time of KWB-503 upgrading programme releasing.
This releasing is Only for the market Dep. and after service engineer upgraing the KWB-503 programme in the customer end. The function of KWB-503 is updated as follows: 1 No Err will be indicated when the hood is put down too quickly when the hood is effective.
2 It defaults non-accuracy mode when the machine starts; the values of the wheel diameter and width in the non-accuracy mode and inch unit will be rounded by 0.5 inch to meet the user operation habit.
3 The special Alus mode under the ALU mode is added and the Alus mode is the user-defined measuring mode which supports the user flexibly operate the balancer under the ALU mode according to the real shapes of the wheel and rim. 2011-12-23 wheel balancer KWB-503 main board burning programme(combination version) releasing The function of KWB-503 is updated as follows: 1 No Err will be indicated when the hood is put down too quickly when the hood is effective.
2 It defaults non-accuracy mode when the machine starts; the values of the wheel diameter and width in the non-accuracy mode and inch unit will be rounded by 0.5 inch to meet the user operation habit.
3 The special Alus mode under the ALU mode is added and the Alus mode is the user-defined measuring mode which supports the user flexibly operate the balancer under the ALU mode according to the real shapes of the wheel and rim. 2011-12-20 KWB-503 change notice before 1. there is no filter. 2. 3D arm is too long. now: 1. add the filter 2. change the length of 3D arm. 2011-10-18 KWB-503 new software Released the new software 2011-4-6