Handheld Oscilloscope Hantek DSO1060 Digital Storage Oscilloscope
Characteristic:
Excellent Industrial Design .Direct key for Each Channel ,Time base ,Trigger and DMM,easy to operate.
Large 5.7 inch TFT Color LCD Display ,Led backlight,Display clearly.
USB Host/Device 2.0 full-speed interface ,support removeable disk, RS-232/LAN Optional ,Easy to control by PC or long-distance.
High Bandwidth 60MHz-600MHz Oscilloscope ,and 6000 COUNTS high precision DMM.
High refresh rate,High Real-time Sample Rate 150MS/s-2GS/s, 50GS/s Equivalent-time Sample Rate.
FFT , + , - , * , / ,X-Y, 22 kinds of auto measurements, PASS/FAIL Check ,easy to use on production line.
Multiform Trigger mode ,2 separate Time Base in ALT Trigger mode ,easy to see 2 signal with different frequency.
1000 waveforms save and record.
Battery Power Operation (Installed) Industrial Design.
Save waveform in the following: jpg/bmp graphic file, MS excel/word file.
Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
LabviewVBVC Second Design instance.
Specification:
MODE |
DSO1060
| |||
VERTICAL | Channels | 2 | ||
Bandwidth | 60MHz | |||
Rise Time | 5.8ns | |||
Input Impedance | Resistance: 1M ; Capacitance: 15 pF | |||
Input Sensitivity | 10mV/div to 5V/div | |||
Input Coupling | AC, DC and GND | |||
Vertical Resolution | 8 bits | |||
Maximum Input | 400V (DC+AC Peak) | |||
HORIZONTAL | Real-Time Sampling Rate | 150MSa/s | ||
Equivalent Sampling Rate | 50GSa/S | |||
Time Base Range | 5ns/div~1000s/div | |||
Memory Depth | 32k at Single Channel, 16k at Dual Channel | |||
Time Base Precision | ±50ppm | |||
TRIGGER | Source | CH1, CH2 | ||
Mode | Edge, Pulse Width, Alternative | |||
X-Y MODE | X-Axis Input | Channel 1 | ||
Y-Axis Input | Channel 2 | |||
Phrase Shift | Max.3 degree | |||
CURSORS AND MEASUREMENT | Voltage Measuremet | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot | ||
Time Measuremet | Frequency,Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle | |||
Delay Measuremet | Delay time from ch1 rising edge to ch2 rising edge | |||
Delay time from ch1 falling edge to ch2 falling edge | ||||
Cursors Measuremet | Manual, Track, Auto Measure Modes | |||
Waveform Signal Process |
| CH1+/- CH2, CH1xCH2, CH1/CH2, FFT, Invert | ||
Storage | Storage | 15 Waveforms and Setups | ||
METER MODE | Maximum Resolution | 6,000 Counts | ||
DMM Testing Modes | Voltage, Current, Resistance, Capacitance,Diode & Continuity | |||
Maximum Input Voltage | AC: 600V, DC: 800V | |||
Maximum Input Current | AC: 10A, DC: 10A | |||
Input Impedance | 10 MΩ | |||
DISPLAY | TFT LCD Type | 5.7 Inch with LED Backlight Display | ||
Display Resolution | 240 (Vertical) x 320 (Horizontal) Dots | |||
INTERFACE | USB | USB Host / Device 2.0 Full Speed Supported | ||
Optional | RS232, LAN | |||
POWER SOURCE | Line Voltage Range | AC 100V ~ 240V, 50Hz ~ 60Hz; DC Input: 8.5VDC, 1500mA | ||
Battery Power (Installed) | 6 Hours (Li-ion Battery) | |||
MECHANICS | Dimension | 245 x 163 x 52 (mm) | ||
Weight | 1.2Kgs | |||
Other | GND Reference | Oscilloscope and Multimeter Independence |