LAUNCH X431 X-PROG 3 Key Programming Immobilizer Programmer Tool

Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.

2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

4. Compatible with: X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII, X431 V , X431 V+ , X431 PRO3s+.

5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

Advantages:

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.

3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.

4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.

5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.

6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

Core Functions:

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.

2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.

3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;

5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.

6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.

7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.

8. Supports the BMW CAS4/CAS4+ module replacement.

9. Supports the ECU cloning and replacement for BMW Siemens engines.

10. Erase the password for Mercedes-Benz engine and gearbox within 3S.

11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

Specification

Introduction:

X-PROG 3 Powerful Functions List:

EEPROM read and write
Key read and write
special key generation
on-board MCU read and write
BMW engine ISN code reading
Benz key
BMW CAS4+, FEM chip read and write
Key Simulator
Audi 5th generation steering column chip reading and writing
Volkswagen's fourth-generation meters are lost
OBD reads MED17 engine
Read engine in BENCH mode
Volkswagen fourth-generation UDS engine replacement
Boot mode read engine
Volkswagen MQB engine, gearbox, steering column lock replacement
Volkswagen four-generation free accounts are all lost
Mercedes-Benz engine gearbox wipe empty function
Transmission data reading

Working ECU MCU : (over 1000kinds model,Updating.....)

Atmel                      NSC
Fujitsu                      Philips
Infineon                      Renesas M16
MC68HC05             Renesas M32
MC68HC08             Renesas M32R
MC68HC11             Renesas R32C
MC68HC12             Renesas R8C
MediaTek                 Renesas V850 SPI
MicroChip             Renesas V850 UART
Nordic                     Samsung
ST                             SiLabs

Working EEPROM : (over 1000kinds model,Updating.....)

4Wire        GI         Numonyx   SST
Adesto    GigaDevice    OKI        ST
AKM     Grundig         ONSemi   Toshiba
Altera       HOLTEK           Other    Winbond
Amic       Hynix            PCT        Xicor
Atmel       I2C            Philips    xUSSR
BOSCH       ITT           Pioneer    YMC
Catalyst       KHIC            PMC         Spansion
Chingis       Macronix     Ramtron    SPI
Dallas/Maxim   MicroChip   Rohm    NEC
EON               Micron         Samsung     NSC
ESMT        MicroWire     Seiko        Ford
EXEL       Mitsubishi     Siemens    Fujitsu
Fairchild       Motorola      Sony

X-PROG3 parameter

Interface:   DB26, DB15
Input voltage:   DC12V
Input current:   500mA
Working temperature:   0-50℃
Storage temperature:   -20-70℃

X-PROG3 Dtails&Functions:

1. Car key slot --------- Place the car key to perform the key matching function

2.DB26
--------- Connect to various anti-theft wiring harnesses, such as the
data collection line for the fourth generation of instrument keys, etc.

3. Mercedes-Benz key infrared slot --------- Place the Mercedes-Benz infrared key to perform the key matching function

4. Car key chip hole --------- Place the key chip to perform key matching

5. Status indicator --------- Power indicator

6.DIY slot --------- Connect the anti-theft ECU pin through the cable to read and write data

7. Locker Install chip burning socket --------- Complete EEPROM or MCU data read and write operations

8.DC12V power supply --------- Connect DC12 power supply

9.DB15 --------- Connect the main wiring


X-PROG3 Packing list:

1. X-PROG 3 key programmer
1.Volkswagen anti-theft copier diagnosis main line
1.DBScar, OBDII Adaptor BOX adapter cable
1.MCU flying lead cable
1.Four generations of all lost mining data lines
1.The fourth-generation instrument does not need to remove the EEPROM and all the lines
1.BENCH mode line

How to use X-PROG3 to read and write data?

Method
1: use main cable to connect car OBD2 16pin interface, and X-PROG3,with
LAUNCH X431 Tablet to do key matching, data reading and writing, etc.

Method
2: Place the anti-theft EEPROM or MCU chip in the chip burning socket,
and then insert the chip burning socket into the slot of the anti-theft
matching programmer locker and lock it to realize the data interaction
between the IC anti-theft chip and the diagnostic host

Method 3:
After removing the ECU from the car, connect the anti-theft ECU pin to
the DIY slot of the anti-theft programmer through the cable to realize
the data interaction between the anti-theft ECU and the diagnostic host.